Back to products

DC120–360

120–360 kW2 × CCS

Standard: 120 and 180 kW. On request: 240 and 360 kW.

Air-Cooled Standalone DC Charger

Two vehicles, one system, one grid connection. 120 to 360 kW, matched to the site.

Talk to our team

An air-cooled standalone DC charger with two CCS connectors, available in 120 kW and 180 kW; 240 kW (6 × 40 kW) and 360 kW (6 × 60 kW) on request. It suits sites that need faster turnaround than overnight charging, with two vehicles charging at the same time. Several air-cooled power modules sit in one cabinet; their number defines the power class. Dynamic load balancing distributes the available power between the two connectors.

[ Key specs ]

Product at a Glance

Power output: 120 or 180 kW DC, Mode 4

On request: 240 kW or 360 kW
Performance: >96% efficiency

Air-cooled
Protection & compliance: IP54, −25 °C to +60 °C

AFIR compliant · Eichrecht certified · CE
Design & mobility: 1770 × 720 × 815 mm

≈340 kg (120 kW) · ≈390 kg (180 kW)
Smart functionality: Touchscreen or RFID start

2 × CCS, dynamic load balancing, GPS
Manufacturing: Made in Europe

Need the full technical picture?

Request access to detailed specifications, drawings and product documentation by completing our NDA form.

Device features

10-INCH DISPLAY

Display design tailored to your brand.

RFID & PAYMENT

RFID start, optional payment system. AFIR compliant · Eichrecht certified.

2 × CCS CONNECTORS

Two vehicles at once, one grid connection. Dynamic load balancing sends power where it's needed.

CABLE MANAGEMENT

Cable management

AIR COOLING

Air-cooled power modules. No derating up to 45 °C ambient.

POWER CLASS

120 or 180 kW standard, 240 or 360 kW on request. DC120 upgradable on site to 180 kW.

[ Product configurator ]

Build your DC120–360 in a few steps

Choose power, payment and cable options. You get a configuration code, and our team gets back to you to discuss your project.

Only valid options
Configuration code
Answer from our team

Configure this product

[ Why it’s different ]

Engineered to Do More

Two charge points from one unit

One installation and one grid connection serve two vehicles at the same time.

Power class to match the site

120 or 180 kW as standard, 240 or 360 kW on request, from the same housing. The DC120 can be upgraded on site to 180 kW.

Dynamic load balancing

Available power goes where it is needed, instead of being split rigidly.

Custom features

Partners can adapt the product to their requirements, for example HMI and branding.

Low noise, wide voltage range

150–1000 V suits both 400 V and 800 V vehicle platforms.

Typical use

Fleet sites with short stops
Retail and destination charging
Dealerships
Bus and delivery depots with midday top-ups
Semi-public and public sites with moderate traffic